How to use nail-free glue?

Nail-free glue refers to a multifunctional building structure strong glue with extremely strong bonding force, which is generally called liquid nails abroad. Nail-free glue is widely used in decoration, furniture, hardware, building materials and other industries because of its advantages such as fast bonding speed, high bearing strength, small amount and easy operation. It is used for bonding and fixing of covering materials, wood, gypsum board, metal, mirror, glass, plastic, rubber, tile and other materials. Basically, it can bond all building materials, and different materials can also be bonded. Next, I will introduce the use of nail-free glue.

1. General construction steps

To ensure product quality, it is recommended that customers clean the surface before use, without dust, grease; no water accumulation and moisture; at the same time, ensure that one side is absorbent material and solid to ensure the bonding effect.

1. Cut the nozzle above the thread line to reach the desired size and angle (about 6mm).

2. Squeeze out one or two continuous strips of glue on the back to be pasted.

3. Bond the materials to be pasted for at least 2 minutes.

4. Wipe off the overflowed glue with a damp cloth.

5. Depending on the different base layers, when bonding heavy objects, certain supports or fixings are still required.

2. Dry bonding method

(Suitable for lighter materials and joints with light bearing capacity)

1. Squeeze out a zigzag adhesive along the bonding surface.

2. Squeeze the adhesive side toward the surface to be bonded and press the two sides tightly.

3. Pull the two bonding surfaces apart and let the liquid nail super glue evaporate for 2-5 minutes.

4. After 2-5 minutes, press again and tap along the joint.

5. Temporarily fix the bonded object with auxiliary tools for 24 hours and cancel the auxiliary fixation.

6. The best bonding effect can be achieved within 24 hours and it will be completely cured within 2-3 days.

3. Wet bonding method

(Suitable for places with only greater pressure, used with clamping tools)

1. Apply liquid nails according to the dry bonding method.

2. Use clamps, nails or screws to immediately bond the two sides or nails tightly.

3. After the glue solidifies (24 hours), remove the clamp.

Ps: A 6mm wide strip can be glued for about 10m. The final strength can be reached after 48 hours, but it may vary depending on the actual situation.